This versatile handheld radio supports both NXDN and DMR digital protocols as well as mixed digital & FM analog operation, enabling it to serve with distinction in a wide range of enterprise- and operation-critical applications. Compact yet designed with durability in mind, it's packed with convenient features like Bluetooth® for hands-free operation and built-in GPS. Additionally, for expansion capability a software license certification system facilitates extensive customization.

PRODUCT HIGHLIGHTS

• Multi-protocol digital radio: Designed to operate under an NXDN or DMR digital, and FM analog protocols
• Mixed Digital & FM Analog Operation allows gradual migration at your own pace
• 4-Line Basic Frame (2 lines of icon & key guide) / 14 Characters
• 5-Line Text Message Frame (3 Lines of Text, icon & key guide)*
• 7-Color Light Bar Indicator on the top panel
• 4-way Directional-pad (D-pad) for intuitive control and operation
• Built-in GPS Receiver/Antenna for effective fleet management
• Built-in Bluetooth for hands-free operation - Applicable Bluetooth profiles: HSP (Headset Profile provided) and SPP (Serial Port Profile available as an option)
• Renowned KENWOOD Audio Quality with Active Noise Reduction (ANR) that utilizes built-in DSP
• Software DES and AES Encryptions for Digital protocols
• Built-in Motion Sensor (Man-down, Stationary and Motion Detection)
• MIL-STD-810 C/D/E/F/G*The number of lines may vary depending on the display language (character set).

GENERAL FEATURES

Audio Output Power: 1 Watt

Dual band, 800-900 MHz capability

Universal audio connector model with 14 accessory contact points to connect with a variety of options, as well as loud audio output and dual mic ANR capabilities

Intrinsically Safe Option

Paging Call

Emergency Call

Status/Text Message

Remote Stun/Kill/Check

SOUND PERFORMANCE, SMOOTH OPERATION

Emulating the distinguished NX-3000 and NX-5000 series, the NX-1700H/1800H mobile radio supports multiple protocols including NXDN and DMR as well as mixed digital & FM analog operation. As it’s packed with all the features essential for numerous enterprise and operation-critical applications. It’s also equipped with optimizable TX/RX audio quality, and a customizable front panel that prioritizes simple convenience: operational status is clear at a glance from the white backlit LCD display and 7-color LED indicator.

Features:

• “One Radio” with Multi-protocol Support:
• Designed to operate under an NXDN or DMR digital, and FM analog protocols
• Upgradable Digital/Analog mode by software option (no firmware upgrade required)
• Easy visible, white backlit LCD display:
  Alphanumeric, 10-digit, 13-character frame (aliases and icons)
  7-color LED indicator used to display various radio status
• Renowned KENWOOD Audio Quality: 6 W (max) loud audio and optimizable
• TX/RX audio profile: Audio Equalizer, Auto Gain Control (TX/RX) and Microphone type settings
• Max. 260 Channels per radio, 128 Zones per radio, and 250 Channels per zone
• Various scan functions: Dual/Single Priority scan, Multi/Single Zone scan and more
• Orange-colored Emergency button & Customizable
• Emergency functions
• Lone Worker
• Remote Stun, Kill, Check
• Dual Priority Scan
• Max/Min Volume setting
• Voice Announcement
• Electronic Serial Number (ESN)
• Display Customization
• D-sub, 15-pin GPIO and audio connector
• GPS connectivity
• Horn Alert and Public Address
• Ignition Sense
• 3.5 mm audio jack for external speaker
• IP54 and MIL-STD 810C/D/E/F/G/H

The NX-5000 Series offers unsurpassed interoperability for a wide variety of users as it supports three digital CAIs - NXDN, DMR and P25 (Phase 1 & 2) - plus FM analog in a single radio. Best of all, a desired CAI can be selected at will, giving you the freedom to migrate at your own pace - whether you are intent on going fully digital, undecided about which digital system to pick, or just wanting to maintain both digital and analog for a while. A NX-5000 radio can simultaneously support two digital protocols plus analog, offering the following combinations: FM/DMR/NXDN, FM/NXDN/P25, and FM/DMR/P25.

Features:

• Multi-Digital operation in NXDN, DMR, and P25 (Phase 1 & 2)
• Any combination of two digital protocols may be selected from NXDN, DMR, and P25
• Mixed Digital & FM Analog Operation allows intelligent migration in mixed sites and easy migration with digital radios in other sites
• Large, Color 1.74" (240 x 180 pixels) Transflective TFT Display for better interface even in direct sunlight and with use of polarized sunglasses
• Easy to follow GUI for at-a-glance operational status and Multi-line Text to convey information
• 4-way Directional-pad (D-pad) and 2-Position Lever Switch for intuitive control
• Built-In GPS Receiver/Antenna for effective fleet management
• Bluetooth® Module Built-in for hands-free operation
• Renowned KENWOOD Audio Quality achieved with Active Noise Reduction (ANR) that utilizes built-in DSP with two microphones for suppression of ambient noise
• Built-in 56-bit DES Encryption
• Optional 256-bit AES Encryption
• Built-in Motion Sensor for man down detection
• microSD/microSDHC Up to 2GB/32GB Memory Card Slot for increased memory capacity for "Voice & Data""
• IP67/68 and MIL-STD-810 C/D/E/F/G
• 6 W (136-174 MHz ) Models
• 5 W (380-470, 450-520 MHz) Models
• 3 W (700/800 MHz) Models
• Full Key Models (w/numeric keypad) and Standard Key Models (w/o numeric keypad)
• Maximum of 1024 CH, 128 Zones (4000 Ch. Opt)
• 1 W Speaker Audio

Kenwood's new NXR-710 and NXR-810 NEXEDGE® repeater is a low-cost, high performance unit that provides a cost effective infrastructure solution for single-site, local area applications. The NXR-710/810 will provide analog or digital operation, and is perfectly suited for a variety of operating environments such as sewage treatment plants, hospitals and hotels.

Below is a brief list of features. For a complete list of product features and specifications, please download the product brochure.

FEATURES

• 136-150, 146-174 MHz
• 400-430, 450-480, 480-512 MHz
• 40 / 110 / 250 Watt VHF Systems
• 40 / 100 / 250 Watt UHF Systems
• 40 / 80 / 130 Watt 800 MHz Systems
• Repeater Operation
• Duplex / Simplex Base Operation
• VHF/UHF models only)
• 30 CH Scanning Base (VHF/UHF Conventional)
• Two-Digit LED / LED Status Indicators
• 6 Programmable Function Keys
• Internal & External Speaker Audio
• Volume Control, Microphone Jack
• Program / Modem Interface
• Remote Terminal Interface
• Programmable AUX I/O's
• DTMF PF Key & AUX I/O Mon/Control