[-Remove]

NX-1200AV/1300AU

NX-1200AV/NX-1300AU is efficient and functional 5W portable radios operate in analog FM. It is packed with features for intuitive operation and excellent performance. The model matrix includes basic and keypad variations, with or without a high-contrast backlit LCD. Other features include a 7-color LED indicator and KENWOOD 2-pin audio accessory connector. If you wish to transition to Digital capability, by purchasing a software option, DMR and Analog or NXDN and Analog mixed operation is available which gives you the freedom and flexibility to migrate at your own pace. All this comes in a tough, compact radio with great value and all weather reliability!

Features:

• Choose from direct & intuitive LCD with standard keypad or basic enclosures
• Easy visible Display: 8-digit LCD models featuring high-contrast, white backlit LCD
• Large 7-Color LED indicator on the top panel
  • Selective Power-on LED
  • Selective Call Alert LED
  • Battery Level Indication
  • Multi-status function indication
• RF output power 5W both on VHF/UHF
• Renowned KENWOOD Audio Quality: TX/RX audio profile with optimizable digital processor
  • Audio Equalizer: Flat, High, Low
  • Auto Gain Control: On, High, Low, Off
  • Noise Suppressor
  • Microphone type settings
• Multiple Scan Functions; Dual Priority, Single Priority, Single Zone, Multi, Normal Scan
• VOX & PTT -triggered Semi- VOX, Voice-operated TX
• Emergency Function: Customizable Emergency Profile
• Lone Worker
• Max / Min Volume setting & Volume control
• Voice Announcement
• Remote Stun / Kill / Check
• Front Panel Programming Mode (for Keypad model)
Electronic Serial Number (ESN)
• MIL-STD-810 C/D/E/F/G
• IP54 and IP55
• Multi-protocol digital radio: Designed to operate under NXDN or DMR digital and FM analog protocols (Optional License required)

[-Remove]

NX-5200/5300/5400

The NX-5000 Series offers unsurpassed interoperability for a wide variety of users as it supports three digital CAIs - NXDN, DMR and P25 (Phase 1 & 2) - plus FM analog in a single radio. Best of all, a desired CAI can be selected at will, giving you the freedom to migrate at your own pace - whether you are intent on going fully digital, undecided about which digital system to pick, or just wanting to maintain both digital and analog for a while. A NX-5000 radio can simultaneously support two digital protocols plus analog, offering the following combinations: FM/DMR/NXDN, FM/NXDN/P25, and FM/DMR/P25.

Features:

• Multi-Digital operation in NXDN, DMR, and P25 (Phase 1 & 2)
• Any combination of two digital protocols may be selected from NXDN, DMR, and P25
• Mixed Digital & FM Analog Operation allows intelligent migration in mixed sites and easy migration with digital radios in other sites
• Large, Color 1.74" (240 x 180 pixels) Transflective TFT Display for better interface even in direct sunlight and with use of polarized sunglasses
• Easy to follow GUI for at-a-glance operational status and Multi-line Text to convey information
• 4-way Directional-pad (D-pad) and 2-Position Lever Switch for intuitive control
• Built-In GPS Receiver/Antenna for effective fleet management
• Bluetooth® Module Built-in for hands-free operation
• Renowned KENWOOD Audio Quality achieved with Active Noise Reduction (ANR) that utilizes built-in DSP with two microphones for suppression of ambient noise
• Built-in 56-bit DES Encryption
• Optional 256-bit AES Encryption
• Built-in Motion Sensor for man down detection
• microSD/microSDHC Up to 2GB/32GB Memory Card Slot for increased memory capacity for "Voice & Data""
• IP67/68 and MIL-STD-810 C/D/E/F/G
• 6 W (136-174 MHz ) Models
• 5 W (380-470, 450-520 MHz) Models
• 3 W (700/800 MHz) Models
• Full Key Models (w/numeric keypad) and Standard Key Models (w/o numeric keypad)
• Maximum of 1024 CH, 128 Zones (4000 Ch. Opt)
• 1 W Speaker Audio

[-Remove]

NXR-900/901

Kenwood is pleased to introduce NEXEDGE® NXR-900/901 conventional and trunking technology featuring 6.25 kHz digital narrowband operation. NEXEDGE® was designed to provide advanced communication solutions that meet the needs of private enterprise and public sectors today and in the future. NEXEDGE® includes features such as FM Analog @ 25 and 12.5 kHz channels, NXDN® digital @ 12.5 and 6.25 kHz channels, compliance with current frequency assignments, and NEXEDGE® will easily convert to very narrow bandwidths in the future.

Below is a brief list of features. For a complete list of product features and specifications, please download the product brochure.

FEATURES

• 136-150, 146-174 MHz
• 400-430, 450-480, 480-512 MHz
• 806-870 MHz
• 40 / 110 / 250 Watt VHF Systems
• 40 / 100 / 250 Watt UHF Systems
• 40 / 80 / 130 Watt 800 MHz Systems
• Repeater Operation
• Duplex / Simplex Base Operation
• VHF/UHF models only)
• 30 CH Scanning Base (VHF/UHF Conventional)
• Two-Digit LED / LED Status Indicators
• 6 Programmable Function Keys
• Internal & External Speaker Audio
• Volume Control, Microphone Jack
• Program / Modem Interface
• Remote Terminal Interface
• Programmable AUX I/O's
• DTMF PF Key & AUX I/O Mon/Control